Antique Appraising

The Performance of Even Antiquated Duct Systems Can be Improved with Regular Maintenance and Cleanin   by Alison Withers

Copyright (c) 2010 Alison Withers

You’ve been appointed facilities manager for a large organisation operating from a number of antiquated buildings.

The records show that the duct systems were installed in some of the buildings many years ago, that access is difficult and that they will not be straightforward to maintain.

Part of your role, however, is to make sure there is a high level of hygiene and air quality in the organisation’s buildings, for the employees who work in them and for the members of the public who visit, to both of whom the organisation has a duty of care.

In addition any cleaning cannot be allowed to disrupt operations in a busy environment.

Funds are in short supply and replacing antiquated systems is too expensive so is there any way you can improve the situation?

With help from an experienced, professional duct cleaning service you can do a vaiety of things. First is to have the system thoroughly appraised to find out how dirty it is and then look at affordable ways of improving access to clean them. Then you will be in a better position to install a regular schedule of inspection, maintenance and cleaning.

The UK’s HVCA (Heating and Ventilation Contractors Association) has a number of guidance publications that may help and it’s a good idea to check whether any company you are considering using is a member and follows its best practice guidance.

Often the problem with old duct systems is the access to see inside the ducts to assess how dirty they really are.

The HVCA’s paper TM26 contains useful guidance for this particular situation: Hygiene Maintenance of Office Ductwork. The publication gives guidance to managers of buildings with air conditioning or other forms of mechanical ventilation, on issues of assessing and maintaining the microbiological cleanliness of duct systems.

The Association recommends that systems should be tested regularly at intervals not exceeding 12 months.

In its publication TR19 section 7: it advises that deposits within systems pose hygiene, odour, vermin and mechanical efficiency hazards. Poorly designed and installed or damaged ductwork can leak grease, thus extending the fire risk, hygiene, odour and vermin hazards.

It advises that ideally access panels should be suitable for the purpose for which they are intended. The panels and frames should be constructed of the same material as the ductwork. As a minimum they should incorporate quick release catches, sealing gaskets and thermal, acoustic and fire rated insulation properties equal to that of the duct to which they are fitted.

They should be as large as the duct size permits without weakening the structure of the system. Openings should not be obstructed by other building services, stored equipment or by the fabric of the building. The panel and aperture should be free of any sharp edges.

The frequency of duct cleaning suggested by the specialist cleaning company on initial inspectiion can be altered if subsequent pre-clean testing shows whether the initial schedule is correct or needs amending.

Duct cleaning improves the safety and efficiency of an installation. As vents become filled with debris, the duct system has to work harder. This increases energy consumption and can also cause fires in the duct system so the advantage of putting in place a regular maintenance, inspection and cleaning regime could also result in a reduced energy bill as well as a healthier, safer environment.

About the Author

Ensuring clean air quality in buildings fitted with old duct and ventilation systems is possible with proper inspection, maintenance and duct cleaning by a specialist cleaning company. There is advice and guidance out there, finds journalist Ali Withers.
Antique Appraiser Helps Texas Woman Strike Gold

The Jeweler’s Directory of Gemstones: A Complete Guide to Appraising and Using Precious Stones From Cut and Color to Shape and Settings $17.79 For goldsmiths, collectors, jewelry-makers, investors, retailers and consumers. The trade of gemstones is a highly specialized and often secretive business. Using The Jeweler’s Directory of Gemstones, written by an expert gemstone dealer and designer, will provide any consumer with the insider knowledge needed to make accurate judgments of gemstones, to recognize low- and high-quality stones,…

ANTIQUE or Shabby Chic? Appraise & Sell Like a Pro! $2.99 NOW in paperback OR eBook! Here’s the PERFECT GIFT for everyone on your list: your garage sale pals, your brother who buys storage lockers, Aunt Trudy who collects Fiesta Pottery, anyone who loves to hunt treasure in thrift stores and auctions. And don’t forget to give yourself a present that will pay for itself ten times over!In one short volume, you’ll learn how to appraise and sell antiques, co…

Collectible Cups and Saucers: Identification and Values (Book 3, Collectible Cups and Saucers) $7.75 Book III in Jim & Susan Harran’s series is all-new, with no repeats from their first two books. Over 1,000 color photographs are included this time, and the book concentrates on cups and saucers that are readily available to collectors. An expanded section on cabinet cups and saucers is provided, and some of the categories from books I and II are again covered: late nineteenth and twentieth centur…